Dipper disks not inclined towards edge-on orbits
Authors:
Ansdell et al
Abstract:
The so-called "dipper" stars host circumstellar disks and have optical and infrared light curves that exhibit quasi-periodic or aperiodic dimming events consistent with extinction by transiting dusty structures orbiting in the inner disk. Most of the proposed mechanisms explaining the dips---i.e., occulting disk warps, vortices, and forming planetesimals---assume nearly edge-on viewing geometries. However, our analysis of the three known dippers with publicly available resolved sub-mm data reveals disks with a range of inclinations, most notably the face-on transition disk J1604-2130 (EPIC 204638512). This suggests that nearly edge-on viewing geometries are not a defining characteristic of the dippers and that additional models should be explored. If confirmed by further observations of more dippers, this would point to inner disk processes that regularly produce dusty structures far above the outer disk midplane in regions relevant to planet formation.
Showing posts with label J1604-2130. Show all posts
Showing posts with label J1604-2130. Show all posts
Sunday, October 30, 2016
Dipper disks not inclined towards edge-on orbits
Saturday, May 2, 2015
ALMA's Observations of Gas Density Drops Inside Protoplanetary Disk Dust Cavities
Gas density drops inside dust cavities of transitional disks around young stars observed with ALMA
Authors:
van der Marel et al
Abstract:
Transitional disks with large dust cavities are important laboratories to study planet formation and disk evolution. Cold gas may still be present inside these cavities, but the quantification of this gas is challenging. The gas content is important to constrain the origin of the dust cavity. We use Atacama Large Millimeter/submillimeter Array (ALMA) observations of 12CO 6--5 and 690 GHz (Band 9) continuum of five well-studied transitional disks. In addition, we analyze previously published Band 7 observations of a disk in 12CO 3--2 line and 345 GHz continuum. The observations are used to set constraints on the gas and dust surface density profiles, in particular the drop delta-gas of the gas density inside the dust cavity. The physical-chemical modeling code DALI is used to analyze the gas and dust images simultaneously. We model SR21, HD135344B, LkCa15, SR24S and RXJ1615-3255 (Band 9) and J1604-2130 (Band 7). The SED and continuum visibility curve constrain the dust surface density. Subsequently, the same model is used to calculate the 12CO emission, which is compared with the observations through spectra and intensity cuts. The amount of gas inside the cavity is quantified by varying the delta-gas parameter. Model fits to the dust and gas indicate that gas is still present inside the dust cavity for all disks but at a reduced level. The gas surface density drops inside the cavity by at least a factor 10, whereas the dust density drops by at least a factor 1000. Disk masses are comparable with previous estimates from the literature, cavity radii are found to be smaller than in the 345 GHz SubMillimeter Array (SMA) data. The derived gas surface density profiles suggest clearing of the cavity by one or more companions in all cases, trapping the millimeter-sized dust at the edge of the cavity.
Labels:
ALMA,
circumstellar disk,
dust,
HD135344B,
J1604-2130,
LkCa15,
protoplanetary disks,
SR21,
SR24S RXJ1615-3255
Subscribe to:
Posts (Atom)